Special
-
FINISH MAPGLISS
Three components, flexible polyurethane topcoat with low static friction coefficient, used for doors and wing flats.
Data sheet -
MAPCOAT
Thick polyurethane coating for protection against erosion of aircraft parts such as radomes, extension of the slats, air inlets, leading edges.
Data sheet -
MAPCOAT AS
Three component, antistatic, thick polyuretane topcoat, used to protect from erosion.
Data sheet -
MAPCOAT TF
Solvent based polyurethane coating, used to protect aircraft parts against erosion. MAPCOAT TF should be applied with Mapaero 9014-B PRIMER (see TDS).
Data sheet -
PRIMER 9014-B
Tri-components polyurethane adhesion promoter. It is necessary to apply the 9014-B before applying MAPCOAT anti-erosion system.
Data sheet -
PRIMER P300
Three components polyurethane primer, high chemical resistance and resistant to high temperature (250°C).
Data sheet -
PUTTY 95-43
Two components, solvent free, adhesive and conductor putty.
Data sheet -
PUTTY 95-43/C
Two components, solvent free, adhesive and conductor putty.
Data sheet -
STAT-100
Antistatic polyurethane paint for radomes and aircraft antennas treatment 5 < R < 100 MW.
Data sheet -
STATIC F1
Antistatic polyurethane coating allowing the flow of electrostatic charges. Electrical resistance of the surface is 5 to 100 MΩ.sq after beingfully cured.
Data sheet -
SURFACER 03-49
Three components epoxy surfacer applicable with spatula or spray.This surfacer should be used on composite or epoxy primer.
Data sheet -
SURFACER P28
Sandable, quick drying polyurethane surfacer three components, used for the preparation of composite or metallic surfaces.
Data sheet -
TOPCOAT AEROMAP F300
Three components polyuréthane topcoat, resistant to high temperature (250°C) with a good chemical resistance.
Data sheet -
TOPCOAT FLUO
Two component fluorescent polyurethane topcoat for marking areas. Must be protected by a clear coat.
Data sheet
AkzoNobel completed the acquisition
of Mapaero in November 2019